A handcrafted wooden 3-drawer nightstand is more than just a functional piece of furniture, it’s an elegant addition to your bedroom. Whether you’ve just purchased a new one or are assembling it yourself, this guide provides easy-to-follow instructions for the safe and proper assembly of your nightstand. Not only will it help you build your bedside unit, but it also offers valuable tips for maintaining its beauty and longevity.

Before You Begin Assembly

Before you start, it’s essential to gather all the necessary tools and components to ensure the assembly process goes smoothly. You’ll also need to follow specific safety tips to keep you and your loved ones safe while putting the nightstand together.

Tools and Parts

Part:

Hardware:

• Knob – 3 units
• Metal Bracket – 2 units
• Wall Plug Screw (M3 x 30mm) – 3 units
• Product Screw (M3 x 12mm) – 3 units
• Washer – 3 units
• Wall Plug (30mm x 5mm) – 2 units
• Screwdriver (not provided) – 1 unit
• Power Drill (not provided) – 1 unit
• Hammer (not provided) – 1 unit

Step 1: Assembling the Drawers and Installing the Knobs

1.1 Stand the Bedside Unit

Start by carefully standing the bedside unit upright with the help of an adult partner. It’s best to do this with caution to avoid damage to the structure. Ensure the piece is in a secure and stable position before moving on.

1.2 Remove the Drawers

Pull the drawers out completely from the bedside unit. Be gentle during this step to avoid damaging the drawer slides.

1.3 Install the Knobs

Now, focus on the knobs. Begin by disassembling the knob (as shown in the accompanying image) by rotating it to the left. Afterward, use your hands to remove the knob from the drawer. Once removed, take the new knob and rotate it to the right to secure it in place.

Repeat this process for each of the drawers to complete the knob installation.

Step 2: Preparing the Wall for Installation

To ensure the nightstand stays secure and prevents any tipping over, the next step involves securing it to the wall. Follow these steps carefully to achieve the best results.

2.1 Position the Bedside Unit

Place the nightstand where you want it to go. Make sure it’s positioned at the desired height against the wall. The positioning of the unit is crucial for both aesthetic appeal and stability.

2.2 Mark the Spot

Measure approximately 5 cm below the top edge of the bedside unit and mark two spots on the wall. These marks are where you will drill holes for the metal brackets, which will later help secure the unit to the wall.

2.3 Drill the Holes

Using a power drill, drill two holes at the marked locations. Ensure the holes are aligned with the placement of the metal brackets. This step will allow you to mount the brackets properly to the wall.

Step 3: Attaching the Metal Brackets to the Bedside

This step involves attaching the metal brackets to the bedside unit to ensure its stability. Here’s how you do it:

3.1 Position the Brackets

Now, take the metal brackets and attach them to the sides of the bedside unit. Use the provided screws (M3 x 30mm) and washers to fasten them securely. Tighten them well with a screwdriver, ensuring they’re held firmly in place.

3.2 将支架连接到墙壁

With the bedside unit still in place, move it toward the wall. Align the metal brackets with the holes you drilled earlier, and then use the screws (M3 x 12mm) to secure the brackets to the wall. Make sure they are tightened thoroughly for optimal stability.

Step 4: Final Adjustments

At this stage, you’ll want to ensure that the unit is firmly secured and stable. Here’s how to complete the final checks:

4.1 Securing the Bedside Unit

Double-check that both sides of the bedside unit are secured properly to the wall. The metal brackets should be tight, and the unit should not move easily.

4.2 Test the Stability

Once the assembly is complete, test the stability of the nightstand. Gently apply pressure to ensure it is stable and cannot be easily tipped over. If necessary, adjust the screws to ensure the unit is tightly secured to the wall.

Safety Warnings

It’s essential to follow these safety guidelines to prevent accidents and ensure your nightstand’s longevity:

• Always install the provided tipover restraint system to reduce the risk of furniture tipover.
• Never place a television on the nightstand.
• Never allow children to stand, climb, or hang on the drawers, doors, or shelves.

Care and Maintenance Tips

To ensure that your handcrafted wooden 3-drawer nightstand stays in top condition for years to come, follow these care and maintenance tips:

1. Regular Inspection

Periodically check all screws and metal brackets to ensure they remain tight and secure. This will prevent any issues with the structural integrity of the unit over time. Additionally, inspect the tipover restraint system to make sure it’s still properly installed.

2. Cleaning

For cleaning, use a soft, damp cloth to wipe down the nightstand. Avoid using harsh or abrasive cleaners that can damage the wood’s surface. If you encounter stubborn stains, use a mild soap solution and a soft sponge to gently scrub the affected area.

3. Avoid Overloading

Avoid overloading the drawers. Overloading can cause wear and tear or compromise the structural integrity of the unit. Always place heavier items in the lowest drawers to maintain balance and stability.

4. Prevent Sharp Object Damage

Keep sharp objects away from the nightstand’s surface. Dropping or dragging sharp objects across the wood could result in scratches or permanent damage.

5. Surface Protection

To prevent water damage or scratches, use coasters or placemats when placing drinks or hot items on the surface. Additionally, avoid placing items with high moisture content directly on the nightstand, as this can cause discoloration or warping.

By following these step-by-step instructions, you can successfully assemble and secure your Handcrafted Wooden 3-Drawer Nightstand. Not only will this ensure its safety and stability in your home, but it will also guarantee that the nightstand remains a functional and beautiful addition to your bedroom for years to come.

You can also download the Handcrafted Wooden 3-Drawer Nightstand Manual(PDF) for future reference.

FAQs

1. How can I fix a wobbly nightstand after assembly?

If your nightstand is wobbly, check the screws and metal brackets to ensure they’re tightly secured. Additionally, make sure the floor is level, and use furniture pads or adjustable feet to stabilize the unit if needed.

2. Can I adjust the height of my nightstand?

Most nightstands do not have adjustable height features. However, if you need to raise it, consider adding a riser or altering the legs to achieve the desired height while maintaining stability.

3. What should I do if the nightstand’s drawers are misaligned?

If the drawers are misaligned, check the screws and the tracks for any looseness. Adjust the slides and realign the drawer, ensuring that all hardware is secure and functioning properly.