Assembly Instructions for HOMCOM Swivel Recliner Chair with Footrest (SKU:833-621V01)

The HOMCOM Swivel Recliner Chair (SKU:833-621V01) is a modern reclining armchair designed for ergonomic comfort and smooth relaxation. Featuring a padded backrest, supportive armrests, a 360° swivel base, and a horizontal retractable footrest, this chair delivers both style and functional support for everyday use.

This guide explains how to assemble the chair correctly using the included parts and hardware. Follow each step carefully in the order shown to ensure structural stability, safe reclining movement, and proper footrest operation.

Important Notes Before You Start

• Assemble on a soft surface (carpet or cardboard) to prevent scratches
• Do not confuse similar screws
• Do not fully tighten the bolts until all components are properly aligned.
• Use the included Allen keys only
• Keep fingers clear of moving recline mechanisms
• Do not sit on the chair until assembly is fully complete

Estimated assembly time: 30 minutes
Recommended: 1–2 people

Parts List

Hardware List

Step-by-Step Assembly Instructions

Follow the structured 4-step assembly sequence below to properly assemble the HOMCOM Swivel Recliner Chair with Footrest (SKU:833-621V01). Complete each step in order to ensure correct alignment, stability, and safe operation.

Step 1: Attach the Backrest to the Seat Base

• Position the Seat Base (②) upright on a protected surface. 
• Carefully align the Backrest (①) with the rear mounting brackets of the seat frame.
• Insert the Long Bolts (④) through the side mounting holes
• Tighten using the Large Allen Key (⑨)
• Install the Hand Tightening Knobs (⑦) on both bottom sides of armrest as shown in image, and tighten firmly by hand.

Ensure the backrest sits flush with the seat frame and remains centered.

Step 2: Secure the Reclining Mechanism

Locate the recline linkage connection area beneath the seat.

• Insert the Locking Pins (⑤) through the designated hinge holes at the bottom of the backrest as shown in image.
• Secure each pin using the provided retaining clips

Confirm that the mechanism pivots smoothly after installation. This step stabilizes the reclining motion and ensures proper structural support during use.

Step 3: Install the Left Armrests

• Position the left armrest on the left side of the seat frame.
• Insert the short bolts (⑥) into the side mounting points at the bottom of the armrest, as shown in the image.
• Tighten using the small Allen key (⑧). The armrest should feel firm with no side movement.

Step 4: Install the Right Armrest

• Now attach the right armrest to the right side of the chair, following the instructions in Step 3.
• Fully tighten all bolts and knobs.
• Ensure the chair stands level without wobbling.
• Confirm that the swivel base rotates smoothly.

The chair assembly is now complete.

Assembly Check (Before First Use)

 Confirm the following:

• Confirm the chair remains level and stable after initial setup
• Recline mechanism operates smoothly
• Footrest extends and retracts properly
• No unusual movement or noise is detected

Safety & Usage Notes

• Use only on a flat, stable indoor surface
• Do not stand on the footrest
• Avoid sudden backward force when reclining
• Periodically inspect hardware for tightness

Maintenance Tips

• Wipe upholstery with a soft, dry cloth
• Avoid abrasive cleaners
• Keep away from prolonged moisture
• Check bolts every few months if frequently used

You can download the HOMCOM Swivel Recliner Chair with Footrest (SKU:833-621V01) assembly manual for your reference.

Need Assistance?

For replacement parts, warranty support, or technical questions, contact Aosom Customer Support for professional assistance.

FAQs