HOMCOM Accent Lounge Rocking Chair Assembly Manual (SKU: 833-860V80)

The HOMCOM Accent Lounge Rocking Chair is designed to offer exceptional comfort, stability, and timeless style for living rooms, bedrooms, or reading corners. Featuring a padded backrest, generously cushioned seat with armrests, and smooth wooden rocker bases, this chair provides gentle rocking motion and reliable support. Its solid structure and thoughtfully designed components allow for a straightforward assembly process using basic hardware and tools included in the package.

Warning & Safety Instructions

Before assembling or using this rocking chair, please carefully read and follow these safety instructions:

• Keep children and pets away during assembly
• Do not use the chair if any part is damaged or missing
• Place and use only on a flat, stable surface
• Do not lean excessively forward or backward while seated
• Adult assembly required
• Maximum weight capacity: 120 kg

Unboxing Your Rocking Chair: What’s Included

Parts List

Hardware Parts

Step 1: Attach the Right Wooden Rocker Base to the Stretcher

• Take Wood Dowel (F) and insert one end into the pre-drilled hole on Part D (wooden rocker base), as shown in the picture. Make sure it fits snugly in the hole.
• Now, take the second end of Wood Dowel (F) and insert it into the corresponding pre-drilled hole on Part E (Stretcher). This will align Part D and Part E properly.
• With the dowel inserted into both Part D (Right Wooden Rocker Base) and Part E (stretcher), the two parts are now aligned and secured temporarily by the dowel. Ensure the parts are straight and aligned.
• After inserting the dowels, align the pre-drilled holes in both parts. Insert M8 × 50 mm Bolts (G) through these holes.
• Add Spring Washers (H) and Flat Washers (I) onto the bolt, as shown in the image, to prevent loosening over time.
• Use Allen Key (J) to tighten the bolts and securely fasten Part D (rocker base) to Part E (stretcher).

Step 2: Attach the Left Wooden Rocker Base to the Stretcher

Take the Left Wooden Rocker Base Part C and attach the stretcher with it with same steps we have done in step 1. 

Step 3: Attach the Seat Cushion with Armrests to the Rocker Base

• Invert Part B (Seat Cushion with Armrests) so the bottom side is facing upward.
• Also turn the assembled rocker frame upside down to allow accurate alignment during installation.
• Carefully position the inverted rocker frame over Part B over the, making sure the mounting points line up correctly.
• Adjust the placement until the pre-drilled holes on Part C (Left Rocker Base) and Part D (Right Rocker Base) are perfectly aligned with the holes on the chair body.
• Once aligned, insert the M8 × 50 mm Bolts (G) through the holes.
• Place Spring Washers (H) and Flat Washers (I) before the bolts to ensure extra stability.
• Use the Allen Key (J) to tighten all bolts securely, ensuring the frame is firmly attached and evenly tightened.

Step 4: Attach the Seat Cushion (Part A) to the Frame

• Carefully lower Part A (Back Rest) onto the frame, ensuring it fits securely in place.
• You may need to gently press it into position if necessary to ensure a snug fit.
• The seat cushion should be firmly attached to the frame, ensuring it is properly aligned with no gaps between the cushion and the frame.
• Once the seat cushion is properly positioned, check the overall stability and alignment of the chair. 

Troubleshooting Guide

Care & Maintenance

• Clean upholstery with a soft, dry or lightly damp cloth
• Do not use abrasive cleaners or harsh chemicals
• Periodically check bolts and washers for tightness
• Avoid prolonged exposure to moisture or direct sunlight

With its cushioned seating, smooth rocking base, and sturdy construction, the HOMCOM Accent Lounge Rocking Chair (SKU: 833-860V80) is designed for long-lasting comfort and everyday use. Proper assembly and regular maintenance will ensure safe performance and continued enjoyment.

You can also download the HOMCOM Accent Lounge Rocking Chair assembly manual for reference.

FAQs