The HOMCOM Tempered Glass Coffee Table offers a sleek, modern design with a sturdy frame and elegant glass tops, perfect for any contemporary living space. With clear, straightforward instructions, assembling this table will take no time at all, and it will provide a beautiful addition to your home or office setting.
Warning & Safety Instructions
Before beginning the assembly process, please read and follow these important safety instructions:
- Keep children and pets away during assembly.
- Ensure all parts are present before beginning.
- Do not use it if any part is damaged.
- Place the table on a flat, stable surface during assembly.
- Tighten all bolts securely but avoid over-tightening.
- Adult assembly is required.
- Maximum weight capacity: 50 kg.
Unboxing Your Table: What’s Included
Parts List
| Part | Quantity | Description |
| A1 | 1 | Tall U-Shaped Table Leg Frame |
| A2 | 1 | Short U-Shaped Table Leg Frame |
| B | 2 | Connecting Stretcher |
| C | 2 | Glass Top Support Frame |
| D | 2 | Glass Top |
| E | 4 | Foot Pad |
Hardware List
| Part | Quantity | Description |
| F | 4 | M8x25 Screws |
| G | 8 | M8x10 Screws |
| H | 8 | Mirror Gripper |
| I | 1 | Allen Key |
Step 1: Assemble the Leg Frames
Attach the Tall U-Shaped Table Leg Frame (A1) to the Connecting Stretcher (B)
- Take the Tall U-Shaped Table Leg Frame (A1) and position it as shown in the image.
- Align the pre-drilled holes of the Connecting Stretcher (B) with the holes on the base of A1.
- Insert M8x25 Screws (F) into the aligned holes, securing the two parts together.
- Tighten the screws but do not fully tighten yet to allow for adjustments.
Attach the Short U-Shaped Table Leg Frame (A2) to the Connecting Stretcher (B)
- Repeat the same procedure with the Short U-Shaped Table Leg Frame (A2) and the Connecting Stretcher (B), ensuring that both are properly aligned.
- Insert the M8x25 Screws (F) through the holes and loosely secure them.
Attach Foot Pads (E) to the Table Leg Frames
- Insert the Foot Pads (E) into the bottom of the leg frames (A1 and A2).
- Ensure the foot pads are securely in place to protect your flooring and provide stability.
Tip: Do not fully tighten all bolts at this stage to allow adjustments in later steps for proper alignment.
Step 2: Attach the Glass Top Support Frames ©
Position the Glass Top Support Frames (C)
- Place the Glass Top Support Frames (C) onto the table leg frames (A1 and A2), as shown in the image.
- Align the pre-drilled holes on the frames (A1 and A2) with the holes on the Glass Top Support Frames (C).
Secure the Frames with M8x10 Screws (G)
- Insert M8x10 Screws (G) through the aligned holes to connect the Glass Top Support Frames (C) to the leg frames (A1 and A2).
- Tighten the screws using the Allen Key (I) to ensure the glass top frames are securely attached.
Tip: Make sure that the glass support frames are aligned evenly before tightening the screws completely to maintain the table’s structural integrity.
Step 3: Attach the Mirror Grippers (H) and Insert the Glass Tops (D)
Insert the Mirror Grippers (H)
- First, take the Mirror Grippers (H) and insert them into the pre-drilled holes on the Glass Top Support Frames (C).
- Make sure the grippers are securely placed along the edges of where the glass will sit.
Place the Glass Tops (D)
- Carefully position the Glass Tops (D) onto the inserted Mirror Grippers (H).
- Ensure that the glass is aligned properly and sits securely in the grippers.
Secure the Glass with the Grippers
- Once the glass is positioned, ensure all Mirror Grippers (H) are tightened, holding the glass firmly in place.
Step 4: Make Sure all the Components are Properly Tightened
If everything looks as shown in the image and all the components are properly tightened, your table is fully assembled and ready for use!
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Table feels wobbly | Bolts not fully tightened | Tighten all screws securely. |
| Glass top not level | Uneven alignment of support frames | Re-align the glass top and grippers. |
| Parts don’t fit | Misaligned holes | Recheck the part orientation. |
Care & Maintenance
- Clean the glass tops using a soft cloth. Avoid abrasive cleaners.
- Regularly check all screws and re-tighten as necessary.
- Avoid placing heavy objects on the table that exceed its weight capacity.
With its sleek glass tops, sturdy metal frame, and modern design, the HOMCOM Tempered Glass Coffee Table (SKU:839-258GD) is perfect for adding a stylish and functional touch to any living space. Proper assembly and occasional maintenance will ensure its longevity and continued enjoyment.
You can also download the HOMCOM Tempered Glass Coffee Table assembly manual for reference.
FAQs
Tempered glass coffee tables are highly durable due to the heat treatment process, making them resistant to impacts and scratches. However, they can still break if subjected to extreme force. Regular care can prolong their lifespan.
Yes, tempered glass coffee tables can be used outdoors, but exposure to harsh weather like rain or excessive sun may weaken the glass over time. It’s best to use them in sheltered areas or with a protective cover.
Tempered glass coffee tables cannot be repaired once cracked because the glass is designed to break into small, safe pieces. In case of damage, the glass should be replaced to ensure safety and functionality.