The Bamboo Laundry Basket with Lid features a ventilated wooden frame with a removable inner bag and hinged lid for easy access. Its structured panel design allows airflow while keeping laundry neatly stored. The unit is designed for straightforward assembly using clearly labeled panels, rods, and hardware. Following each step in order ensures proper alignment, smooth lid operation, and long-term stability.
⚠️ Warning & Safety Instructions
Before beginning assembly, review the following safety guidelines carefully:
- For indoor household use only
- Assemble on a clean, flat, and stable surface
- Keep children and pets away during assembly
- Do not use the product if any part is damaged or missing
- Avoid overtightening screws to prevent wood damage
Unboxing Your Cabinet: What’s Included
Remove all items from the package and confirm that all parts and hardware listed below are present before starting assembly.
Parts List
| No. | Part Name | Quantity |
| 1 | Basket Lid | 1 |
| 2 | Support Rods | 2 |
| 3 | Back Panel | 1 |
| 4 | Front Panel | 1 |
| 5 | Side Panel | 2 |
| 6 | Basket Base Panel | 1 |
| 7 | Inner Bag | 1 |
Hardware List
| Code | Hardware | Quantity |
| A | M4*25 Screws | 12 |
| B | M3*12 Screws | 12 |
| C | Butt Hinges(1) | 2 |
Step-by-Step Assembly Instructions
Step 1: Attach the Side Panels to the Back Panel
- Place the Back Panel (3) flat on the floor with the slatted side facing inward.
- Position the two Side Panels (5) on both ends of the back panel, aligning the pre-drilled holes at the side edges.
- Secure each side panel to the back panel using M4×25 Screws (A), tightening evenly to keep the frame square.
Step 2: Install the Front Panel
- Stand the partially assembled frame upright on a flat surface.
- Position the Front Panel (4) between the two Side Panels (5), making sure the slatted side faces outward and the edges align evenly.
- Insert M4×25 Screws (A) through the pre-drilled holes on both sides to secure the front panel in place.
- Tighten all screws evenly, ensuring the cabinet frame remains straight and stable.
Step 3: Insert the Basket Base Panel
- With the cabinet frame standing upright, align the Basket Base Panel (6) above the opening.
- Carefully lower the base straight down into the cabinet, making sure it sits evenly on the internal support rails.
- Check that the base panel is fully seated and level on all sides
Step 4: Assemble the Inner Bag with Support Rods
- Lay the Inner Bag (7) flat and locate the stitched loops along its top edges.
- Slide Support Rods (2) through each top loop, inserting them fully from end to end as shown.
- Ensure both rods are seated evenly and parallel so the bag remains balanced when installed.
Step 5: Install the Inner Bag into the Cabinet
- Lift the assembled Inner Bag (7) and hold it above the cabinet opening.
- Carefully lower the bag straight down into the frame, guiding the Support Rods (2) onto the internal ledges at the top of the cabinet.
- Make sure the rods sit securely and the bag hangs evenly without twisting or folding.
Step 6: Attach the Butt Hinges to the Cabinet Frame
- Position the two Butt Hinges (C) evenly along the top rear edge of the cabinet frame, aligned with the pre-drilled holes.
- Secure each hinge to the frame using M3×12 Screws (B), inserting and tightening the screws straight down as shown.
- Ensure both hinges are firmly fixed and properly aligned.
Step 7: Attach the Basket Lid
- Place the Basket Lid (1) onto the cabinet, aligning it with the installed Butt Hinges (C) at the back edge.
- Insert M3×12 Screws (B) through the hinge plates into the lid’s pre-drilled holes.
- Tighten all screws evenly while keeping the lid properly aligned.
Step 8: Final Check and Ready for Use
- Open and close the lid several times to confirm smooth hinge operation.
- Check that all screws are fully tightened and the cabinet stands level on the floor.
Your laundry basket cabinet is now fully assembled and ready for everyday use.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Cabinet feels unstable | Screws not evenly tightened | Recheck and tighten all screws |
| Lid does not close properly | Hinges misaligned | Loosen hinges, realign, retighten |
| Inner bag tilts | Support rods not seated | Reposition rods evenly |
| Panels misaligned | Frame tightened too early | Loosen, square frame, retighten |
Care & Maintenance
- Wipe wooden surfaces with a dry or slightly damp cloth.
- Remove the inner bag periodically for cleaning.
- Do not use harsh chemicals or abrasive cleaners.
- Check screws occasionally and retighten if needed.
- Avoid placing excessive weight on the lid.
With its ventilated panel design and removable inner bag, this Bamboo Laundry Basket with Lid (SKU:850-255V00CF) offers practical storage with a clean, structured look. Assembling the unit step by step ensures proper alignment, smooth lid operation, and reliable everyday use.
You can also download the assembly manual for reference.
FAQs
A bamboo laundry basket is often considered better than plastic because it allows natural airflow, which helps reduce trapped moisture and odours. It also offers a warmer, more stylish appearance that blends well with home interiors. Plastic baskets, however, may perform better in constantly wet areas but lack breathability.
Bamboo laundry baskets can grow mould if they are exposed to excessive moisture or poor ventilation for long periods. Damp clothes left inside can encourage mould to develop on the bamboo fibres. Regular airflow, drying the basket, and placing only dry laundry inside helps prevent this issue.
Bamboo laundry baskets are suitable for bathrooms with good ventilation and low humidity levels. They should be positioned away from direct water splashes or wet floors to avoid moisture absorption. Allowing the basket to air out regularly helps maintain durability and cleanliness.
A bamboo laundry basket is eco-friendly because bamboo is a fast-growing, renewable resource with minimal environmental impact. Its production generally requires fewer chemicals compared to plastic alternatives. This makes bamboo a more sustainable option for long-term household use.