HOMCOM Convertible Sleeper Chair Assembly Manual (SKU:83B-233V00BU)

The HOMCOM Convertible Sleeper Chair is a versatile 3-in-1 furniture piece designed to function as a cozy armchair, a relaxing lounger, and a practical pull-out single bed. With soft upholstery, supportive cushioning, and a durable metal frame, it offers comfort for reading, resting, or accommodating overnight guests. Ideal for small apartments, studios, bedrooms, or office nap spaces, this compact chair transforms easily with a smooth sliding mechanism.

WARNING & SAFETY INSTRUCTIONS

Before assembling or using the sleeper chair, read these essential safety instructions carefully.

• For domestic indoor use only.
• Place the chair on a flat, stable floor.
• Keep the product away from open flames, heaters, and high-heat sources.
• Do not exceed the maximum weight capacity: 120 kg
• Avoid applying excessive force or overload onto any part of the chair.

UNBOXING YOUR SLEEPER CHAIR: WHAT’S INCLUDED

PART LIST

STEP-BY-STEP ASSEMBLY INSTRUCTIONS

Step 1: Attach the Support Feet (E) to the Armrests (B)

1. Place both Armrests (B) upright on a flat surface.
2. Locate the pre-drilled holes on the bottom of each armrest.
3. Take one Support Foot (E) and align it with the hole.
4. Twist the Support Foot clockwise until fully tightened.
5. Repeat this step for all four Support Feet (E), two for each armrest.
6. Once installed, stand the armrests upright and make sure they sit evenly and without wobbling.

Step 2: Install the Caster Wheels (D) onto the Main Sofa Body (A)

1. Lay the Main Sofa Body (A) on its side or back so the underside is fully accessible.
2. Position one Caster Wheel with Mounting Bracket (D) over each pre-drilled mounting point on the sofa frame.
3. For each caster installation, insert the hardware in the following order:
   • First, place Washer (G) onto the screw.
   • Then insert the Screw (F) through the washer and into the bracket hole.
4. Use the Allen Key (H) to tighten each screw securely.
5. Repeat this process for all four Caster Wheels (D).
6. Once complete, check that each caster is firmly attached and rotates freely.

Step 3: Attach the Main Sofa Body (A) to the Armrests (B)

1. Position both Armrests (B) upright on the floor with their inner connection brackets facing inward.
2. Lift the Main Sofa Body (A) carefully and align the metal brackets on the sides of the sofa body with the receiving brackets inside each armrest.
3. Lower the sofa body straight downward so that the brackets slide securely into place on both armrests.
4. Make sure the left and right sides are evenly aligned and fully seated in the bracket channels.
5. Gently pull and push the sofa body to confirm it is locked firmly and does not shift.

Step 4: Position the Back Cushion C

1. Place the Back Cushion (C) onto the backrest of the chair.
2. Adjust the cushion so it sits flat and fully supported against the backrest panel.
3. Make sure the cushion is centered and provides comfortable back support.

Your chair is now ready for use in its standard seated position.

To Recline the Backrest

1. Gently pull the backrest forward slightly.
2. Let it drop backward into the desired reclining position (two angles are shown: Position ① and Position ②).

To Extend the Sleeper Bed

1. Locate the pull-out strap underneath the front seat cushion.
2. Pull the strap outward to slide the lower bed frame forward.
3. Continue pulling until the extension is fully stretched and lies flat with the chair seat.

TROUBLESHOOTING GUIDE

CARE & MAINTENANCE

• Wipe with a soft, damp cloth.
• Do not drag lift when repositioning.
• Tighten screws periodically.
• Keep the pull-out mechanism free of dust and debris.

With proper assembly and regular care, your HOMCOM Convertible Sleeper Chair (SKU:83B-233V00BU) will provide a comfortable, sturdy, and versatile seating option for everyday use. Its smooth pull-out mechanism, supportive cushions, and durable frame make it ideal for relaxing, lounging, or accommodating an overnight guest. Keep the chair well-maintained to ensure long-lasting performance and ease of use.

You can also download the HOMCOM Convertible Sleeper Chair manual (SKU:83B-233V00BU) for your reference.

FAQs

1. Can a sleeper chair be used as a permanent guest bed?

A sleeper chair works well for occasional or short-term guest stays, but it’s not designed to replace a full mattress permanently. While supportive, the sleeping surface is narrower and thinner than a standard bed. It’s ideal for studios, offices, and multipurpose rooms, but not for everyday long-term sleeping.

2. Is a sleeper chair suitable for seniors?

Yes sleeper chairs can be senior-friendly if they offer firm cushioning, a higher seat height, and an easy-to-operate pull-out mechanism. Seniors benefit from models with good back support and stable armrests for balance. Choosing a chair with minimal bending or lifting makes daily use much safer.

3. What mattress type do sleeper chairs use?

Most sleeper chairs use high-density foam, memory foam, or a hybrid cushion that balances firmness with comfort. These materials keep the design compact while still providing support. Thicker or multi-layer foam options generally offer better sleep quality for guests.

4. What are the disadvantages of a sleeper sofa?

Sleeper sofas can be heavier, harder to move, and take up more space when opened. The mattresses are usually thinner than regular beds, which may feel less supportive for long-term sleeping. Their folding mechanisms also require light maintenance to avoid stiffness or noise over time.