Assembly Instructions for HOMCOM 360° Swivel Bar Stools Set of 2 (SKU: 835-630CW)

The HOMCOM 360° Swivel Bar Stools Set of 2 brings modern style and comfort to your kitchen island, home bar, or counter space. Each stool features a smooth 360° swivel seat, a sturdy 4-leg wood frame, a circular footrest for comfort, and a padded upholstered seat and backrest.

This article walks you through assembling both stools step by step.

Before You Start

• Lay all parts on a soft, flat surface before beginning.
• Check that the product is not damaged and no pieces are missing.
• Do not fully tighten any bolt until all parts are connected.
• Be aware of crushing and cutting hazards during assembly.
• Keep small hardware away from children.
• Assembly takes approximately 15 minutes per stool.
• Steps marked ×2 must be repeated to build the second stool.

What’s in the Box

Parts

Hardware

Step-by-Step Assembly Instructions

Follow each step carefully to assemble your HOMCOM 360° Swivel Bar Stools Set of 2 (SKU: 835-630CW). Steps marked ×2 must be completed twice, once for each stool.

Step 1: Build the Leg Base Frame

1. Place the Bottom Leg Assembly (E) on the floor with the open connector slot facing up.
2. Insert the Upper Leg Assembly (F) down into the open slot on top of part E.
3. Press firmly until both assemblies are fully connected and the 4-leg base sits stable and level.

✔ You should now have one complete 4-leg base frame standing upright. Repeat the same step for the second stool.

Step 2: Attach the Swivel Plate to the Leg Base

1. Keep the 4-leg base frame standing upright in its normal position.
2. Place the Swivel Plate (D) centered on top of the frame, aligning all 4 mounting holes.
3. Insert 4 Pan-Head Screws (J) through the swivel plate holes into the frame.
4. Tighten all 4 screws firmly using the Allen Key (L).

Note: The swivel plate should sit flat and secure with no movement. Repeat for the second stool.

Step 3: Attach the Footrest Ring

1. Flip the 4-leg base frame upside down so the legs point upward.
2. Place the Footrest Ring (G) around the 4 legs at mid-level position as shown in the image.
3. Align the 4 mounting holes on the ring with the holes on each leg.
4. Insert 4× Medium Bolts (I) through the ring holes into each leg.
5. Tighten all 4 bolts using the Allen Key (L).

Note: The footrest ring should sit level and firm. Repeat for the second stool.

Step 4: Attach the Backrest to the Seat Frame

1. Place the Seat Frame (C) on a soft surface facing up.
2. Hold the Chair Backrest (A) against the back edge of the Seat Frame (C), aligning all mounting holes as shown in image.
3. Insert 3× Flat-Head Screws (K) through the backrest holes into the seat frame.
4. Tighten the screw using Allen Key (L).

Note: The backrest should sit snug against the seat frame. Repeat for the second stool.

Step 5: Attach the Seat Frame to the Seat Cushion

1. Lay the Seat Cushion (B) face down on a soft surface. 
2. Place the Seat Frame (C) with the attached backrest on top of the seat cushion, aligning all mounting holes. 
3. Insert 4× Long Bolts (H) through the seat frame holes into the seat cushion. 
4. Tighten all 4 bolts using the Allen Key (L).

Note: The seat and backrest assembly should feel solid and rigid. Repeat for the second stool.

Step 6: Mount the Leg Base onto the Seat Assembly

1. Place the seat assembly face down on a soft surface with the Seat Frame (C) facing up.
2. Flip the leg base frame upside down and lower it down over the seat assembly, aligning the Swivel Plate (D) holes with the Seat Frame (C) holes as shown in the image.
3. Insert 4× Pan-Head Screws (J) through the swivel plate into the seat frame.
4. Tighten all 4 screws fully using the Allen Key (L).
5. Flip the completed stool upright and spin the seat a full 360° to confirm the swivel moves smoothly.

Note: Repeat for the second stool.

Your HOMCOM 360° Swivel Bar Stools assembly is complete and ready for use.

Final Check Before Use

• All bolts and screws are fully tightened on both stools.
• All 4 legs sit flush and stable on the floor.
• The footrest ring is level and firm.
• The seat and backrest feel solid with no movement.
• The swivel rotates smoothly through a full 360°.
• Neither stool wobbles when pressed down on the seat.

Care & Maintenance

• Upholstered seat and backrest: Spot clean with mild detergent and a damp cloth. Air dry completely before use.
• Wood leg frame: Wipe with a soft dry or slightly damp cloth. Avoid harsh chemical cleaners.
• Storage: Store in a clean, dry place to avoid moisture damage or mold on the upholstery.

Customer Support

If any parts are missing or damaged, or if you need assembly help, contact Aosom Customer Support directly.

You can download the full HOMCOM 360° Swivel Bar Stools Set of 2 (SKU: 835-630CW) assembly manual for reference. 

FAQs