Assembly Instructions for HOMCOM 55″ Wood Kitchen Table with Drop Leaf (SKU: 835-908V00)

The HOMCOM 55″ Wood Kitchen Table with Drop Leaf is a versatile dining solution designed for small spaces. Its solid wood construction offers durability and a natural finish that fits any home décor. The two drop leaf extensions let you expand the table surface when needed and fold them down to save space when not in use. 

Before You Start

• Lay all parts on a soft, flat surface before beginning.
• Verify the product is not damaged and check no pieces are missing before assembly.
• Do not fully tighten any bolt until all parts are connected.
• Two people are recommended for easier assembly.
• Be aware of crushing and cutting hazards during assembly.
• Keep small hardware away from children.

What’s in the Box

Parts

Hardware

Step-by-Step Assembly Instructions for HOMCOM 55″ Wood Kitchen Table with Drop Leaf (SKU: 835-908V00)

Follow each step carefully to assemble your HOMCOM 55″ Wood Kitchen Table with Drop Leaf (SKU: 835-908V00) smoothly and safely.

Step 1: Insert Threaded Rod Bolts into Table Legs

1. Take all four table legs ③ and place them flat on a soft surface.
2. Insert one barrel nut B vertically into the top hole of each leg, ensuring the threaded hole aligns with the bolt hole.
3. Insert two threaded rod bolts A horizontally into the leg holes and screw them into the barrel nut.
4. Repeat this step for all legs.
5. Hand-tighten only at this stage.

Step 2: Attach Table Legs to the Main Tabletop Panel

1. Turn the main tabletop panel ① upside down on a soft, flat surface.
2. Position all four table legs ③ at the four corners of the tabletop, inter the threaded rod bolt ends with the pre-drilled holes.
3. Place washer D onto the threaded rod bolt, followed by hex nut C, and tighten using spanner G.
4. Make sure each leg sits flush and straight against the tabletop corner as shown in the diagram. Incorrect angle will cause wobble after assembly.
5. Tighten to 70–80% only, do not fully tighten yet.

All four legs should now be attached to the underside of the main tabletop panel.

Step 3: Attach Drop Leaf Extension Panels Using Corner Brackets

1. With the table still upside down, position both drop leaf extension panels ② on each side of the main tabletop panel ① as shown in image. 
2. Align each metal corner bracket F over the joint between the main tabletop and the drop leaf panel on designated holes.
3. For each bracket location, place metal corner bracket F and drive 6 screws E through each bracket hole to secure it firmly.
4. Now fully tighten screws E using spanner G.

Note: The horizontal support bars visible on the underside of both the main tabletop panel and drop leaf panels are pre-attached and require no additional assembly.

Step 4: Attach Feet Pads to Table Leg Bottoms

1. With the table still upside down, locate the bottom of each table leg facing upward.
2. Attach foot pad H to the bottom of each table leg.
3. Press firmly to ensure each pad is fully secured.
4. Once all four pads are attached, carefully turn the table upright onto its legs.

Final Check Before Use

• All hex nuts and screws are fully tightened.
• All four table legs stand firm with no wobble.
• Both drop leaf panels fold up and down smoothly.
• Feet pads are attached to all four leg bottoms.
• The table sits level and stable on the floor.

Safety Notes

• Place on a flat, stable floor surface only.
• Do not exceed the table weight capacity.
• Do not stand or climb on the table.
• Keep away from open flames.
• Do not attempt to repair or modify any structural components yourself, only trained personnel should adjust or repair furniture components.

Care & Maintenance

• Wood tabletop and legs: Wipe with a dry or slightly damp cloth. Avoid harsh chemical cleaners that may damage the natural wood finish.
• Drop leaf panels: Open and close gently, do not force the panels if they feel stiff. Check bracket screws periodically.
• Hardware: Check and re-tighten hex nuts and screws periodically to keep the table stable.
• Storage: Keep away from excessive moisture and direct sunlight to protect the wood finish and prevent warping.

Customer Support

If any parts are missing or damaged, or if you need assembly help, contact Aosom Customer Support.

You can download the full HOMCOM 55″ Wood Kitchen Table with Drop Leaf (SKU: 835-908V00) assembly manual for reference.

FAQs