The Comfy Reading Armchair features a supportive padded seat, integrated armrests, and a fitted backrest designed for everyday comfort. Its compact structure makes it suitable for living rooms, bedrooms, offices, or reading corners. The chair is designed for quick and straightforward assembly using clearly labeled parts and included hardware. By following the steps in order, proper alignment, stability, and long-term durability can be ensured.
⚠️ Warning & Safety Instructions
Before beginning assembly, review the following safety guidelines carefully:
- For indoor household use only
- Assemble on a flat, stable surface
- Keep children and pets away during assembly
- Do not use the chair if any part is damaged or missing
- Do not exceed the recommended weight capacity
- Keep fingers clear of pinch points during alignment
Unboxing Your Chair: What’s Included
Remove all items from the box and confirm that all parts and hardware are present before starting assembly.
Parts List
| Part No. | Quantity | Description |
| A | 1 | Backrest |
| B | 1 | Seat |
| C | 1 | Left Armrest |
| D | 1 | Right Armrest |
| E | 1 | Back Cushion |
Hardware List
| Hardware | Quantity | Description |
| F | 8 | M8 × 75 mm Screws |
| G | 4 | M8 Washers |
| H | 1 | Ø22 mm Washer |
| J | 1 | 6 mm Allen Key |
Step 1: Connect the Seat (B) to the Left Armrest(C)
- Place the Left Armrest (C) flat on a level surface, as shown.
- Set the Seat (B) onto Left Armrest (C) so B stands upright/perpendicular to the armrest base.
- Align the mounting holes on B with the matching holes on C.
- For each connection point, slide the washers on first in the same order shown in the diagram:
- Add Washer (G) and the Washer (H) as indicated.
- Insert the M8 × 75 mm Screws (F) through the washers and into the aligned holes.
- Use the Allen Key (J) to tighten the screws to about 70-80% tightness only.
- Do not fully tighten yet keeping them slightly loose helps the parts align correctly in the next steps.
Step 2: Attach the Right Armrest (D) to the Seat Assembly
- With the Seat (B) already attached to the Left Armrest (C) from Step 1, keep the assembly positioned upright as shown.
- Place the Right Armrest (D) flat on the surface.
- Lower the seat-and-left-armrest assembly onto D, making sure the seat remains perpendicular to the armrest base.
- Carefully align the mounting holes of the seat frame with the holes on Right Armrest (D).
- At each connection point, place the washers first in the order shown in the diagram:
- Washer (G) followed by Washer (H).
- Insert the M8 × 75 mm Screws (F) through the washers(as shown in diagram) and into the aligned holes.
- Using the Allen Key (J), tighten the screws to approximately 70-80% tightness only.
Step 3: Install the Backrest and Fully Tighten All Screws
- Position the Backrest (A) above the seat assembly, as shown in the diagram.
- Lower the backrest straight down so the side connectors on A slide into the slots on both armrests.
- Press gently until the backrest is fully seated and aligned on both sides.
- Once the backrest is correctly installed, use the Allen Key (J) to tighten all previously installed screws to 100% tightness.
- Make sure every screw is evenly tightened to ensure proper alignment and structural stability.
Step 4: Place the Back Cushion and Complete Assembly
- Position the Back Cushion (E) against the backrest, as shown in the diagram.
- Make sure the cushion sits evenly and is centered for proper support.
- Check that the chair is standing upright on a flat surface.
- Confirm that chair feels stable with no wobble.
Assembly is now complete. Your chair is ready for use.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Chair feels loose | Screws not fully tightened | Tighten all screws evenly |
| Chair wobbles | Armrests misaligned | Loosen screws, realign, retighten |
| Screws difficult to install | Holes not aligned | Adjust position before tightening |
| Backrest not fitting | Armrests not square | Re-align armrests before inserting backrest |
Care & Maintenance
- Clean using a soft, dry, or slightly damp cloth
- Do not use abrasive cleaners or harsh chemicals
- Periodically check and retighten screws
- Use only on level indoor flooring
- Keep away from excessive moisture or humidity
With its compact footprint and supportive structure, this Comfy Reading Armchair (SKU:F-BBS-WF325072AAG) offers reliable everyday seating and straightforward assembly. Following the steps in sequence ensures correct alignment, safety, and long-lasting comfort.
You may also download the Comfy Reading Armchair manual for your reference.
FAQs
Yes, a comfy reading armchair helps improve posture by supporting the natural curve of the spine and reducing slouching while sitting for long periods, as it provides proper back, lumbar, and arm support that keeps the body aligned, which helps minimise strain on the neck, shoulders, and lower back during reading.
A comfy reading armchair is better than a sofa for reading because it offers firmer structure and targeted support that prevents sinking into cushions, helps maintain an upright sitting position, and improves overall comfort and focus during extended reading sessions.
Yes, a comfy reading armchair is suitable for elderly users as it provides stable seating with supportive armrests that make sitting down and standing up easier, reduces pressure on joints through proper cushioning, and offers back support that enhances comfort and safety.
Yes, you can sit in a reading armchair for hours because it is designed with ergonomic support and comfortable cushioning that evenly distributes body weight, reduces pressure points, and helps prevent discomfort or fatigue during long periods of sitting.