Oval Tempered Glass Coffee Table Assembly Manual (SKU:F-CYS-W487P317842)

Modern oval glass coffee table with dark wood base.

The Oval Tempered Glass Coffee Table features a compact glass-top design supported by a sturdy tripod-style frame. Its balanced structure and minimal footprint make it suitable for living rooms, lounges, or seating areas. The table is designed for straightforward assembly using labeled components and included hardware. Following the steps in order ensures correct alignment, stability, and long-term performance.

⚠️ Warning & Safety Instructions

Before beginning assembly, review the following safety guidelines carefully:

For indoor household use only
Assemble on a flat, stable surface
Keep children and pets away during assembly
Do not use the table if any part is damaged or missing
Do not place excessive weight on the glass surface
Keep fingers clear when aligning bolts and frame parts

Unboxing Your Table: What’s Included

Remove all items from the package and confirm that all parts and hardware listed below are present before starting assembly.

Parts List

Table showing wood tripod legs, support bar, and glass.

Hardware List

Chart of bolts, washers, Allen key, and suction cups.

Step 1: Join the Tripod Frames

Interlocking two wooden tripod base frames with hardware assembly.

Place the Long Tripod (1) and Short Tripod (2) upright on a flat surface, positioning them so they align together as shown in the diagram.
Put the Short Tripod (2) onto Long Tripod (1) so the top center holes line up correctly.
Insert the Long Bolt (A) through the aligned hole, placing the Spring Washer (C) first and then the Flat Washer (D) in the same order as shown.
Using the Allen Key (G), tighten the bolt.

Step 2: Flip the Frame and Attach the Support Bar

Connecting wood support bar to tripod legs using bolts.

Turn the partially assembled Long Tripod (1) and Short Tripod (2) upright, as shown in the diagram, and place it on a flat surface.
Position the Support Bar (3) between the two tripod frames so its end hole aligns with the side mounting hole on the Short Tripod (2).
Insert the Long Bolt (A) through the aligned holes, placing the Flat Washer (D) first and then the Spring Washer (C) in the same order shown.
Using the Allen Key (G), tighten the bolt.
Press the Plastic Cover (E) over the bolt head as illustrated.

Step 3: Secure the Support Bar to the Opposite Tripod

Securing the center crossbar junction with a short bolt.

Keep the partially assembled frame upside down on a flat surface, as shown in the diagram.
Align the free end of the Support Bar (3) with the mounting hole on the Long Tripod (1).
Insert the Short Bolt (B) through the aligned hole, placing the Spring Washer (C) first and then the Flat Washer (D) in the same order shown.
Using the Allen Key (G), tighten the bolt.
Do not fully tighten at this stage to allow final alignment before installing the glass top.

Step 4: Install the Glass Panel

Placing glass top onto suction cups on table frame.

With the table frame standing upright on a flat surface.
Make sure every connection is evenly tightened and the frame feels solid with no looseness.
Press one Glass Sucker (F) firmly onto each top mounting point of the frame, as shown.
Carefully lower the Glass Panel (4) straight down onto the glass suckers, keeping it centered.
Confirm the glass sits evenly and the table remains stable without wobbling.

Troubleshooting Guide

Issue	Possible Cause	Solution
Table feels loose	Bolts not fully tightened	Tighten all bolts evenly
Frame misaligned	Parts tightened too early	Loosen, realign, retighten
Glass not stable	Suckers not seated	Reposition suckers and glass
Bolts difficult to insert	Holes misaligned	Adjust frame position before tightening

Care & Maintenance

Clean the glass using a soft, dry or lightly damp cloth
Do not use abrasive cleaners or harsh chemicals
Periodically check and retighten bolts
Avoid dragging the table across flooring
Keep away from excessive moisture or humidity

With its clean glass surface and stable tripod frame, this Oval Tempered Glass Coffee Table (SKU:F-CYS-W487P317842) offers reliable everyday use and simple assembly. Following the steps in sequence ensures proper alignment, safety, and long-lasting durability.

You can also download the official Oval Tempered Glass Coffee Table manual for reference.

Download Manual (PDF)

FAQs

1. Is a tempered glass coffee table safe for everyday use?

Yes, a tempered glass coffee table is designed for daily use, as the glass is heat-treated for added strength and impact resistance. It can handle regular household items without cracking under normal conditions. Proper assembly and even weight distribution help maintain long-term safety.

2. How do you stop a glass coffee table from sliding?

Placing anti-slip pads or rubber feet under the table legs helps prevent movement on smooth floors. A non-slip rug or mat beneath the table can also improve stability. Regularly checking and tightening connections keeps the table balanced.

3. Is an oval coffee table better than a rectangular one?

An oval coffee table offers smoother edges, making it safer in compact or high-traffic seating areas. Its rounded shape allows easier movement around the table. It also creates a softer visual flow compared to sharp-cornered designs.

4. How do you clean an oval tempered glass coffee table?

Use a soft microfiber cloth with a mild glass cleaner or diluted vinegar solution. Wipe gently to remove fingerprints and dust without scratching the surface. Always dry the glass fully to avoid streaks or water marks.