The Outsunny Wooden Patio Side Table is a compact and functional furniture piece designed for everyday use in living rooms, balconies, patios, or garden seating areas. Featuring a sturdy wooden frame and Patio tabletop, this table provides a stable surface for drinks, books, or décor. Its simple structure allows for quick assembly while maintaining durability and visual appeal, making it a practical addition to both indoor and covered outdoor spaces.
Warning & Safety Instructions
Before assembling or using this table, carefully follow these safety guidelines:
- For domestic household use only
- Place the table on a flat, stable surface during assembly and use
- Adult assembly is required
- Keep children away from small parts during assembly
- Do not sit, stand, or climb on the table
- Ensure all screws are fully tightened before use
- Check periodically to ensure all fittings remain secure
Unboxing Your Side Table: What’s Included
Parts List
| Part | Qty | Description |
| 1 | 2 | Stretcher Support |
| 2 | 2 | Leg Frame |
| 3 | 1 | Table Top |
| A | 8 (+1 spare) | M6 × 70 Screws |
| B | 1 | T-handle Hex Key |
Step 1: Attach the Leg Frame to the Table Top
- Place the Table Top (3) upside down on a clean, flat, and protected surface.
- Position one Leg Frame (2) vertically against the underside of the table top, aligning the pre-drilled holes.
- Insert M6 × 70 Screws (A) through the Leg Frame into the table top holes.
- Tighten the screws using the T-handle Hex Key (B) until secure.
- Do not fully overtighten at this stage to allow for easier alignment.
Step 2: Install the Stretcher Support
- Position one Stretcher Support (1) horizontally at the top of the assembled Leg Frame (2).
- Align one end of the stretcher support with the pre-drilled hole on one upright post of the Leg Frame, positioning it just below the top of the post.
- Insert an M6 × 70 Screw (A) through the side frame post into the stretcher support.
- Tighten the screw using the T-handle Hex Key (B).
- Leave the opposite end of the stretcher support unattached to allow adjustment.
Step 3: Secure the Stretcher Supports to the Opposite Side Frame
- Take the free end of each Stretcher Support (1) and align it with the corresponding hole on the opposite upright post of the Leg Frame (2).
- Ensure both stretcher supports remain horizontal and level before fastening.
- Align the pre-drilled holes on the stretcher supports with the hole on the upright post.
- Insert an M6 × 70 Screw (A) through the side frame post into stretcher support.
- Tighten the screws using the T-handle Hex Key (B) until secure.
- Once both ends are attached, fully tighten all previously installed screws.
Step 4: Attach the Second Leg Frame
- Position the second Leg Frame (2) on the open side of the assembly, aligning it with the free ends of both Stretcher Supports (1).
- Make sure the Leg Frame sits upright against the underside of the table top and the stretcher supports remain level.
- Align the pre-drilled holes on the Leg Frame with the holes at the ends of the stretcher supports and underside of the table top.
- Insert M6 × 70 Screws (A) through the Leg Frame into each stretcher support and underside of the table top.
- Tighten the screws using the T-handle Hex Key (B).
- Once all connections are made, fully tighten all screws.
Final Step: Completion
- Carefully turn the table upright and place it on a flat, stable surface.
- Check that the Table Top (3) is level and all Leg Frames (2) stand straight.
- Ensure both Stretcher Supports (1) are securely attached on all sides.
- Fully tighten any remaining M6 × 70 Screws (A) using the T-handle Hex Key (B) if needed.
Troubleshooting Guide
| Issue | Possible Cause | Solution |
| Table feels unstable | Screws not fully tightened | Tighten all M6 × 70 screws evenly |
| Table does not sit level | Uneven surface | Move the table to a flat surface |
| Frame misalignment | Parts tightened too early | Loosen screws, realign, then retighten |
| Wobbling after assembly | Stretcher supports not secure | Check and tighten stretcher connections |
Care & Maintenance
- Wipe the table regularly with a soft, dry or slightly damp cloth.
- Avoid prolonged exposure to moisture to prevent wood damage.
- Store the table in a dry, covered area when not in use.
- Do not use abrasive cleaners or harsh chemicals on the surface.
With its sturdy frame, clean Patio design, and compact structure, this Outsunny Wooden Patio Side Table (SKU:84B-674V00GN) is designed for reliable everyday use. Proper care and regular maintenance will help preserve its appearance and ensure long-lasting performance for years to come.
You can also download the Outsunny Wooden Patio Side Table (SKU:84B-674V00GN) manual for your reference.
FAQs
1. How much weight can a patio side table hold?
Most patio side tables support between 30 and 110 pounds, depending on the material and construction. Metal and solid wood tables usually handle heavier loads than plastic options. They are suitable for drinks, food trays, and small décor items. Always check the product’s weight capacity for safe use.
2. Are patio side tables easy to clean?
Patio side tables are generally easy to clean with mild soap and water. Smooth surfaces like metal, glass, and plastic wipe down quickly. Wooden tables may need occasional sealing or special cleaners. Regular cleaning helps maintain their appearance and durability.
3. Can a patio side table be used as a plant stand?
Yes, many patio side tables work well as plant stands due to their sturdy design. They can hold medium-sized planters without issue. Water-resistant materials like metal and resin are ideal for this purpose. Ensure the table’s weight limit matches the planter size.